Description

It adopted good high luminance LED-visibility
LED of each part using LED good visibility high intensity.

Blinking ⇔ Flowing blinker can be switched Adopted a blinker that can switch between blinking mode and sequential mode. It is possible to switch left and right at the same time with the attached switch.

Turn signal function with improved visibility from the rear by adopting high-brightness LEDs and increasing the number of lighting points. It combines dress-up and safety.

Built-in light bar with position function

The built-in circuit that lights up 2-3 seconds after the turn signal is turned off, and only the light bar can be turned on when the turn signal is turned off. It can be connected to a small lamp and used as a position lamp, or it can be connected to a constant power supply and used as a day lamp.
If you do not connect it, you can use it only with the winker function.

Built-in foot lamp to support getting on and off at night
Equipped with 4 high-intensity white SMDs.
By connecting to a room lamp, etc., it can be lit in conjunction with the keyless.
It illuminates your feet at night and welcomes the driver.

■ Wiring Color specification
red line: to the blinker +
blue line: light bar + (Please connect at any)
black line: blinker – to the
black line: the foot lamp –
white line: the foot lamp +
Green line: To the turn signal changeover switch
Black line: To the turn signal changeover switch
* All connections are free (no terminal processing).
To prevent short circuit, insulate the wiring that is not connected.