Description

Narrow over fender for Jimny Sierra JB74 made of ABS resin.
It will be an unpainted product, but it is a quality that can be used as it is.
* If you drop gasoline, it may discolor (it may lose its luster), so wipe it off quickly.

The model was changed from the previous model JB43 to Jimny Sierra JB74, and the larger over-fenders is a powerful and popular point. However, when actually using the JB74, there is also a situation
where the narrow forest road in Japan is too wide to proceed … So at Apio, while leaving the room for the Jimny Sierra JB74 that evolved to a 1.5L engine, I dare to make a narrow fender that holds down the over fender by about 30mm on each side.

Fender Size Comparison

Genuine fender width
F: 90mm on one side
R: 85mm on one side

Apio narrow fender width
F: 61mm on one side
R: 58mm on one side

Apio’s “JB74 Narrow Sierra” has narrowed the width of the car, which is wider than its predecessor, making it possible to drive on Japanese roads lightly and on forest roads without worrying about the width of the road. By replacing the normal fender with a “narrow fender”, the front is narrowed by 58mm (29mm on one side) and the rear is narrowed by 54mm (27mm on one side).
The wheels have been changed from 15 inches to 16 inches, and narrow and tall tires have been set to give more room to the ground clearance.

Parts required for mounting

1. JB64 tactical rear bumper and number transfer kit
It is necessary to install the JB64 rear tactical bumper (part number: 3032-70 / 3032-70B). The rear terminal has a shape that matches the side of the rear tactical bumper for JB64. In addition, a number transfer kit (part number: 3060-25) is required to install the tactical rear bumper.

2. Side sill guard

It will be installed by removing the genuine side skirt. Since the clip hole of the genuine side skirt remains on the body side where it was removed, it is recommended to install the HD side sill guard (product number: 3102-69). * Not required.

3. Size wheel for JB64 If it is a
Sierra genuine offset wheel, it will come out from the fender, so it is recommended to install a wheel for the light car Jimny. Apio chooses WIDBOAR series 16 inch 5.5J inset 20 with 6.50R16 tires and 205R16 tires for the wheels equipped with the 40mm up suspension kit. (* The photo is 205R16)