Description
Silicone plug cord exclusively for NGK iridium plugs!
Demonstrate power-up just by replacing it with a silicon power plug cord!
Main features of Ultra Silicone Power Plug Cord BP
Silicone rubber with excellent withstand voltage and heat resistance is used for silicone cables, boots, and caps, and the name of the ultra silicone cord
is unified to the popular “Cobalt Bull-” color.
The set models are mainly the most distributed model numbers among the current products and are limited to the 200 models with the highest usage rate such as iridium plugs, and the compatibility is gradually expanding.
The core wire of “Blue Point Power Plug Cord” is a copper core wire with the best conductive characteristics, and like the conventional silicone series, it has a three-layer structure of silicone core, glass braid (sheath), and silicone rubber coating, which makes it resistant. The voltage has achieved a high withstand voltage of 150,000 V or more.
“Blue Point Power Plug Cord” adopts a low resistance value that matches the latest spark plug characteristics, and is a low resistance winding with a uniform resistance value of 0.5KΩ (1/2 or less compared to our conventional products) for each cylinder. Developed and adopted line resistance (noise inhibitor). Although the resistance value is as low as 0.5kΩ, the winding type noise suppressor (resistor) efficiently cuts noise by the effect of the L (inductance) component. In addition, by arranging Ultra’s original noise suppressor at the end of the plug cord, a uniform resistance value is realized for each cylinder, and by adopting a low resistance value of 0.5 kΩ, the maximum spark energy is supplied without loss.
The low resistance value of 0.5kΩ per cylinder is the best match for plugs with R (register) and iridium plugs.
If the vehicle uses a genuine simultaneous ignition system, it uses a resistance value of 0.6 kΩ
Reviews
There are no reviews yet.